Powder coat pricing ??

ALLJ · Sep 27, 2013

What is the ballpark rate for getting a buggy powder coated ?

BUG-E J · Sep 27, 2013

Depends on how many coats and if you want clear. How many things are you taking. Color makes a big difference. Can go anywhere from 800-2k depending on alot of different things.

matth_85 · Sep 27, 2013

Mine with one coat (silver vain) and a clear coat was right around 550 IIRC. Small pieces make the price go up also. I had a few separate pieces that went on the chassis.

84turbotoy · Sep 27, 2013

We just had our circle track car coated, it was a used car and the center section was original black powder coat. The guy said it was hell to get off so ours was $900 and we also got a bunch of little body support tubing coated too.

. They call that Bengal red. Coyote coating in Hueytown Al done ours, that's who done momentum and all of blue torch's stuff.

Sent with telegraph

stano · Sep 27, 2013

This cost me $550 to get blasted and coated. Cash.

Jhouser · Sep 27, 2013

stano said:
This cost me $550 to get blasted and coated. Cash.

Where Are you located and who did it for $550?

snoball · Sep 27, 2013

Spend your money with the ones that do it rite! Cheap powder coat = shitty looking buggy after a few rides. :****:

civicmindedex79 · Sep 27, 2013

**** yall are getting some great prices. I attempted to have mine done in a two stage silver/blue (suppose to look like blue anodized) and they quoted $1200. I had the whole chassis and 5 rims done the blue color then had engine cage, oh **** bar, links and a trim piece on interior done in the same silver. My two tone did not come out and after the third try he just one stage blue and I let it go.

I contacted 5 different places and no where was under a grand single stage and for the two tone it was all 2 grand and up.

I do not recommend "It's not paint" in hunstville, alabama for chassis. They did great work on the single stage small pieces but the chassis was a wreck and was blamed on powder issues, so maybe he could do a good job on chassis.

Kidd1 · Sep 27, 2013

Matth_85 could you post up a picture of the silver vain on your buggy. Thanks

ALLJ · Sep 27, 2013

Thanks for the replies guys I talked to Auto Cycle powder Coat in Chattanooga some time back about doing it I have seen a couple they have done any of yall used them before ? seems like a nice guy but still want to check around but unless there is a big $$ difference it not worth driving really far away

smurfy90 · Sep 27, 2013

ALLJ said:
Thanks for the replies guys I talked to Auto Cycle powder Coat in Chattanooga some time back about doing it I have seen a couple they have done any of yall used them before ? seems like a nice guy but still want to check around but unless there is a big $$ difference it not worth driving really far away

if I had your money id burn mine!