cushmaneaglerider
Well-Known Member
Are the elcheapo eBay/Amazon even worth buying? Who has ran them? Real world advise is not expected with you clowns but is needed.
-
Help Support Hardline Crawlers :
Ls block hugger headers
- Thread starter cushmaneaglerider
- Start date
I bought some of the stainless shortys off amazon and they were actually really well made with tubes of decent thickness. I couldn't buy the parts and build them cheaper.
Last edited:
cushmaneaglerider
Well-Known Member
can you service the sparkplugs without having to remove the headers? That seems to be the complaint with most I have looked at.
Beerj
Sonzabitches!
I used these on my buggy and the wife's yj.
Left them as they were on her jeep and they work just fine. For the buggy, I had to cut off the mounting flange and extend the tubes to clear the chassis but everything was fine after that. No issues accessing plugs or burning plug wires.
LS Swap Headers 304SS FOR Chevy C10 Chevelle Camaro Caprice LS1 LS2 LS6 LS7 LSX | eBay
Fits GM Gen III/IV 4.8L/5.3L/5.7L/6.0L/6.2L LS engines (LS1/LS2/LS3/LS6/LS7). Shorty design for power gain from idle to mid-range RPM. All joints TIG welded for great resistance against cracking and wearing.
www.ebay.com
Left them as they were on her jeep and they work just fine. For the buggy, I had to cut off the mounting flange and extend the tubes to clear the chassis but everything was fine after that. No issues accessing plugs or burning plug wires.
Beerj
Sonzabitches!
Actually on hers, I had to trim the ears on the bellhousing to clear but they weren't needed for anything anyway
DobermanRacing
Well-Known Member
I'm running the same ones Beerj linked. No issue removing plugs with them on.
cushmaneaglerider
Well-Known Member
Thanks
