• Help Support Hardline Crawlers :

the new fattness...

Erik D_lux said:
Funny I saw that same tank/storage

I wouldnt use it. When I had my normal fuel cell with no pickups I tired to make an accmulator. It didnt work out too good. Still ran out of fuel here and there. I ended up making my own cell and running the pickups.

well,
I went and bought that tank/tool box thing last night......
but I think it'll be going in the tow rig instead...
the tank.....WAY bigger than I need.....much bigger than the "40 gallons" advertised......I'm guessing its somewhere between 60 and 75 gallons....

but, this may mean.....I'll put a smaller tank in the new rig, and just re-fuel out of the tow rig......
or, put diesel in the tank and be almost able to make it to vegas and back empty w/ stopping for fuel....


either way....
I still need a fuel tank for the new rig.....

I'd say minimum size would be around 25 gallons....

ideas..???

--B
 
Berne said:
well,
I went and bought that tank/tool box thing last night......
but I think it'll be going in the tow rig instead...
the tank.....WAY bigger than I need.....much bigger than the "40 gallons" advertised......I'm guessing its somewhere between 60 and 75 gallons....

but, this may mean.....I'll put a smaller tank in the new rig, and just re-fuel out of the tow rig......
or, put diesel in the tank and be almost able to make it to vegas and back empty w/ stopping for fuel....


either way....
I still need a fuel tank for the new rig.....

I'd say minimum size would be around 25 gallons....

ideas..???

--B

go but some aluminum and make one, find someone to tig it together for you, with a tank that big it will be hard to find what you are after

Ben
 
Ben Holloway said:
go but some aluminum and make one, find someone to tig it together for you, with a tank that big it will be hard to find what you are after

Ben

which brings me to my next dilema....

I'm uber-tight on time.....and I'm really NOT going to have time to build a tank before Goldendale.....
but "I KNOW" that building a tank for it is what needs to happen for this to be what I want.....I could save so much space, and design it w/ a built in ~0.5 gallon sump....

anybody got a fuel cell I can borrow till after goldendale??

--B
 
saf-t scissors said:
So where are the new pictures?

I'll get some pictures for you tomorrow nancy.....

I didn't take a single picture all weekend.....


I'm not sure I'm going to be done for Goldendale...
 
If you hadn't spent all Friday pissing around in the scrapyard, I suspect you might have gotten more accomplished. :flipoff:

Me? I spent the better part of Sunday playing Xbox. It was hot outside.
 
finally got some more pics...
 

Attachments

  • x_member_1.JPG
    x_member_1.JPG
    27.3 KB · Views: 202
  • x_member_2.JPG
    x_member_2.JPG
    24.1 KB · Views: 203
  • x_member_3.JPG
    x_member_3.JPG
    24.5 KB · Views: 209
and some more....
 

Attachments

  • x_member_4.JPG
    x_member_4.JPG
    31.3 KB · Views: 206
  • x_member_5.JPG
    x_member_5.JPG
    30.7 KB · Views: 202
  • x_member_6.JPG
    x_member_6.JPG
    28.4 KB · Views: 202
a few more of the x-member....
it turned out to be alot of work, but I think it'll hold up pretty well....
 

Attachments

  • x_member_7.JPG
    x_member_7.JPG
    31 KB · Views: 194
  • x_member_8.JPG
    x_member_8.JPG
    23.6 KB · Views: 191
  • x_member_9.JPG
    x_member_9.JPG
    24.1 KB · Views: 189
some other various pics....

if you're not using "PipeMasters" for your tube work.....you SHOULD be!!!...
 

Attachments

  • pipemaster_1.JPG
    pipemaster_1.JPG
    25.8 KB · Views: 223
  • pipemaster_2.JPG
    pipemaster_2.JPG
    21.1 KB · Views: 216
  • pipemaster_3.JPG
    pipemaster_3.JPG
    22.3 KB · Views: 215
Last edited:
started on the rear....
 

Attachments

  • rear_out.JPG
    rear_out.JPG
    30.7 KB · Views: 217
  • bridge_1.JPG
    bridge_1.JPG
    28.4 KB · Views: 225
  • bridge_2.JPG
    bridge_2.JPG
    28.8 KB · Views: 217
  • bridge_3.JPG
    bridge_3.JPG
    21.1 KB · Views: 211
Its moving slowly man! What do you do after work? That bitch should be done by now! You suck at picture taking BTW:flipoff:

I like the X-member though. I'll be by this weekend. Let me know if you need some fab help.
 
binderbound said:
Its moving slowly man! What do you do after work? That bitch should be done by now! You suck at picture taking BTW:flipoff:

I like the X-member though. I'll be by this weekend. Let me know if you need some fab help.


Hater!:looser:
 
binderbound said:
Oh please!:flipoff: A day doesnt go by that I dont catch a load of crap from team fat ****. any time I can flip a little **** back, I'll take it.


O I C okay well i wasnt aware of this so it appeared to me to be hate hahaha
 

Latest posts

Back
Top