-
Help Support Hardline Crawlers :
Exhaust systems
- Thread starter crash2
- Start date
crash2
-Oh no I picked a side-
snwbrdpunk16 said:
At least it will make a "noise",lol...
TheMasterbater
Well-Known Member
crash said:
Wait till i straight pipe mine, u'll be trying to hump my exhaust pipe when you hear that turbo howl come outa there :clappy:
Lucky Jeff
Well-Known Member
Me be thinkin I need to take you for a ride in my Ram once she's back on the road (soon I hope)snwbrdpunk16 said:
TheMasterbater
Well-Known Member
Lucky Jeff said:
I didnt say it'll have power, i just said it'll sound good :haha:
crash2
-Oh no I picked a side-
I know with the 6 liter fords with a straight pipe you could hear this odd whistle coming out the exhaust...
TTF Fabrication
Well-Known Member
haha, thats for sure. my friend has a 4" straight pipe on his 6.0 and when he starts it up it sounds identical to a jet engine. you can barely hear the exhaust over the turbo whine in normal driving. then if he gets on it, it sounds like a 572 w/ headers and thats it.
crash2
-Oh no I picked a side-
TTF Fabrication said:
I thought they sounded like a school bus going down the road....
Lucky Jeff
Well-Known Member
You can hear the whistle when it's bone stock.. I drove one through the Tacoma Dome during the Monster truck show a couple of years back.. Allll whistle.
And I didn't say nothin about power, My truck aint got any of dat. I just meant the sound :flipoff:
And I didn't say nothin about power, My truck aint got any of dat. I just meant the sound :flipoff:
TheMasterbater
Well-Known Member
U should hear mine when i start it up in the morning and it kicks into warm-up/idle mode. it sounds like a jet engine 
Fullywrecked
Well-Known Member
Lucky Jeff said:
It makes about 40#'s more boost than you truck does with out a head on it!:flipoff:
Fullywrecked
Well-Known Member
Tankota said:
Lookin Good Tankota!!!! I can vouge that his trucks sounds sweet with the new tip!:cheer:
crash2
-Oh no I picked a side-
Got myself a coffee can. So do you guys suggest on flairing the end out
crash2
-Oh no I picked a side-
FatMan said:
Yup--just waitingt for robin to get back to me and then I get to make my rig make cool noises
But going with the 4" afe system for now then intake...
crash2
-Oh no I picked a side-
FatMan said:
More turbo noise---can't wait now
leadfoot067
Well-Known Member
i had my AFE installed in like 2 hours...that included welding all the joints....
crash2
-Oh no I picked a side-
With any luck I will have my new exhaust tommorow :cheer: :cheer:
What intake are you going with?
I'll show ya the setup I did on mine some time. I just went down to the parts store and bought the biggest cone filter they had with a 4" opening, cost me about 50 bucks for a good K&N look-alike... cut about 5" off of a piece of 4" exhaust tube I had around, and clamped it to my stock intake hose, then clamped the filter to that and built a little support for the filter. Works great and sounds even better, and the filter is cleanable like the K&N's.
I'll show ya the setup I did on mine some time. I just went down to the parts store and bought the biggest cone filter they had with a 4" opening, cost me about 50 bucks for a good K&N look-alike... cut about 5" off of a piece of 4" exhaust tube I had around, and clamped it to my stock intake hose, then clamped the filter to that and built a little support for the filter. Works great and sounds even better, and the filter is cleanable like the K&N's.
