• Help Support Hardline Crawlers :

Search results

  1. Hip

    Dad's stang...

    .........
  2. Hip

    ARB leaking air into axle

    i ended up cutting one too short once. ARB has a add on kit to just splice a piece onto your existing if you can find a place suitable to cut and splice. they even gave it to me free. if it wasnt metric you could buy the stuff at home depot but 1/8 " is not the same as ARB line.
  3. Hip

    8274 wiring

    only hook up three pins. on the other end of the controller rewire it to 3 pin.:awesomework: the 8274 only needs three wires to work. it cant handle 5. jeese im not the person to give wiring advice...:haha: but thats how i see it the three wires are 12 v in to switch and 12v out or in...
  4. Hip

    Tire pressure gauge

    i use a gauge off a regulator 0-15 psi for the low pressure and a stick for highpressure.... had a broken regulator at work so i stole the gauge from it.:awesomework:
  5. Hip

    OBDII code - P0894.....

    my suburban has had that code for over ten years now and i cant make it go away. my tranny does not slip. i have towed a LOT and my trans does not slip. i can clear it long enough to pass smog each two years then after about two weeks it comes back. i think in my case it just shifts slow...
  6. Hip

    Would you run it??

    i noticed that on my warn chromo shafts the first time i took it apart after install like ten years ago. still running with 39.5 irocks and a V8......:redneck: but yes the stressor is already there waiting to snap.
  7. Hip

    So i bought a 51 Whilly

    Actually it worked great, however i should/will need to add to it a little. i have a lip under the engine oil pan and it was flexed up enough to touch/crease the pan, causing the crankshaft to barely hit it. this caused imediate alarm but was a fairley easy fix to drop the pan beat the crease...
  8. Hip

    So i bought a 51 Whilly

    skidplate in action....:beer: http://www.youtube.com/watch?v=aw2KbJCWNew&feature=channel :D:D:D:awesomework: Let me be the first to Report the repost.
  9. Hip

    Best in the West 2012

    now that sounds like a plan.....:D
  10. Hip

    Manual reverse shift VB?

    i bought the one above from summit and it rocked the hammers. once in a while if your idle drops too low the compression braking seems to go away but in my rig if you just keep your foot off the brake it picks right back up as soon as the RPM raise a little from gravity. take some getting used...
  11. Hip

    Chevy 454 fanbelt keeps jumping off?

    "winner" the original belt and the spares were all too thin, i tried a 1/16th wider belt and even though it seems too fat it is staying on so far. the other belts the center was barely touching causing the sides of the belt to loose grip:D
  12. Hip

    Best in the West 2012

    yeah thats what i meant.....what jim said. in case somebody needs help fast and to keep people on course.:redneck:
  13. Hip

    Best in the West 2012

    so what does that mean ? does someone have to participate in the entire series or just one race? i dought i can do the event in september but the rest i think i can make.:D
  14. Hip

    Best in the West 2012

    Bring it Bill you will have a blast.
  15. Hip

    Chevy 454 fanbelt keeps jumping off?

    i agree its a bit difficult but the belts were new and tight.:fawkdancesmiley: im really thinking serpentine if i can find it. powersteering pump, waterpump, alt and crank. not much to it. no ac, air pump or anything. do they even make serpentine for 454's, im not a chevy guy but it sure...
  16. Hip

    Night wheeling. Look at this retard.

    that was my first thought also. :haha: glad you were there and ABLE to help.:awesomework:
  17. Hip

    Chevy 454 fanbelt keeps jumping off?

    no air pump. can chack i guess but oil pressure is high and steady. i didnt remove the other belt and check waterpump bearings but the pulley is aligned perfect. i'll remove other belt to verify. i think the pitch is right but there is a little minor (very minor) rust damage from...
  18. Hip

    Chevy 454 fanbelt keeps jumping off?

    this is an 82 454 in my motorhome. when i bought it the fan belt was squeeling a little. week later it bailed. bought a new one and discovered two spares in the motorhome parts bin?? replace it squeel went away mostly. lasted a week. 100 miles went bye bye....replaced alternater. looked...
  19. Hip

    Best in the West 2012

    might be nice to have some monitors spread out to make sure competetors stay on the course.....not that any of us would do that:fawkdancesmiley: would love to run the course again. i had a blast last time.
  20. Hip

    Trailer brakes

    so after all the bull crap how much voltage should i be getting to the brake wire on the plug. on my Motor home i only get between 3.6 and 5.7 V? brakes dont work. Old style energizer controller. it does vary the voltage but it seems low to me?

Latest posts

Back
Top