For Sale 1978 J10 Golden Eagle on 43's

[CarolinaCrawler1]

This is a build from @BUCKEYE PERFORMANCE INC. from back in the day. Truck has been all over the southeast and wheeled with the best of them. I bought it a couple years ago and just don't wheel it anymore. I would rather it pass onto someone that will wheel it like it needs.

1978 J10
Stock 360 with custom tuned GM TBI
Stock T18
Stock D20 with JB twin sticks
Olivers .250 wall rear driveshaft
Dana 60 front axle with 5.13 gears, spartan locker, 35 spline Foote stub shafts, one chromoly inner, forged spicer joints, Yukon locking hubs, behind the axle high steer with hydro assist and diff cover
14 bolt with 5.13 gears, detriot locker, disk brake kit, custom 13 bolt shave cover, and pinion support
43" sx tires on Raceline beadlocks
Front suspension is waggy leafsprings with custom slider boxes and worn out rough country shocks
Rear suspension is 4 link with coil springs
It has built in cooler mount, toolbox and spare tire storage

I have lots of spare parts and the factory doors that could go back on with very little work. Truck is ready to wheel.

$9,000 Located in Hickory, NC

Fun fact, the truck has less that 40k original miles.

 

[Markrobinson]

I'm not in the market, but that's pretty badass.

 

[Zjman]

That's what I call a "man's" rig

 

[ole heep]

Cool truck!

 

[jawilcox8409]

Any idea when the last time drivetrain was freshened up?

 

[CarolinaCrawler1]

All the fluids are changed once a year, but that's pretty much all the maintenance it needs. When it was wheeled regular it would get a driveshaft ujoint at the front axle once a year just because. It has a new joint and yoke there currently.

 

[jawilcox8409]

All the fluids are changed once a year, but that's pretty much all the maintenance it needs. When it was wheeled regular it would get a driveshaft ujoint at the front axle once a year just because. It has a new joint and yoke there currently.

hmu @ gmail jawilcox8409

 

[CarolinaCrawler1]

SOLD