22re power (oxymoron I know)

Redwoodinnovations · Feb 26, 2017

Do flame Thrower injector's make a difference?
What cam (with actual experience ) can u recommend?

POR · Feb 26, 2017

If your trying to get power out of a Toyota engine.. there's no such thing :haha:

crazybluerider1 · Feb 26, 2017

POR said:
If your trying to get power out of a Toyota engine.. there's no such thing :haha:

This guy disagrees with you. http://www.pirate4x4.com/forum/toyota-truck-4runner/2197633-4500-class-1st-gen.html

:fawkdancesmiley:

However I don't even want to know how many cubic dollars have been shoveled into that little screaming time bomb. :redneck:

POR · Feb 26, 2017

crazybluerider said:
This guy disagrees with you. http://www.pirate4x4.com/forum/toyota-truck-4runner/2197633-4500-class-1st-gen.html

:fawkdancesmiley:

However I don't even want to know how many cubic dollars have been shoveled into that little screaming time bomb. :redneck:

Lol I definitely say he disagrees..

it's ashame it'll only run a couple hrs before blowing up

WHITE TRASH1 · Feb 26, 2017

A guy up in Canada did all the normal tweaks to an re from port work, aggressive cam, supra afm etc and put down 160 hp/ 190 tq to the back tires on a 2wd and flat ran out of computer.

Bang for the buck is a nice midrange cam (around 265* duration and over .450" lift), adjustable cam gear, port matching at the minimum, good header and the best single bang for the buck... a lightweight flywheel. The old tech of hanging a 30 lb flywheel off the crank so the engine can lug down has been superceded by dual t cases. I've done all the mods and bolting a 9lb flywheel on woke that little tractor engine up more than every other mod combined.

WHITE TRASH1 · Feb 26, 2017

crazybluerider said:
This guy disagrees with you. http://www.pirate4x4.com/forum/toyota-truck-4runner/2197633-4500-class-1st-gen.html

:fawkdancesmiley:

However I don't even want to know how many cubic dollars have been shoveled into that little screaming time bomb. :redneck:

An R series isn't even in the same class as an rz. 350 hp from an rz is just another tuesday. Dead nuts reliable and cheap to build.

crazybluerider1 · Feb 26, 2017

WHITE TRASH said:
An R series isn't even in the same class as an rz. 350 hp from an rz is just another tuesday. Dead nuts reliable and cheap to build.

He said at KOH that the current build is over 500 wheel.

WHITE TRASH1 · Feb 26, 2017

crazybluerider said:
He said at KOH that the current build is over 500 wheel.

Yea I've been following along. It'll live. There are 3rz's out there running over 1000 hp in drag rigs so they are capable of much, much more than 350 while still being reliable.