• Help Support Hardline Crawlers :

6AL msd for a 22r good or not?

G

gh3

Active Member
Joined
Jan 31, 2011
Messages
31
Location
eatonville wa
I was thinking about getting a msd 6al for my 22r with carb. I can get it for a good deal.
Just looking for some feed back. Pros and cons. Or should i just sell it if i get it. Has anyone done this.

Thanks
 
Its not going to be an improvement over the state of the art toyota ignitor.

If you had an old dodge or ford with a crappy stock module then great upgrade. Or if you needed it for its revlimmiter then sure it would be an upgrade. But its not much of an improvement over the OEM toy and chev HEI ignitions.

But I doubt its as tough as the OEM toyota stuff and is more complexe for no gain.

If you want to wire something that will be a gain then swap in the efi stuff and call it good.
 
I have a blaster ss coil and msd6a on my dd that came with an engine I had in it once and it made a big difference in starting time (fewer revolutions before start) and a bit more power in the upper rpm's. Would I buy it new and replace the stock stuff? No, but if you can get used stuff cheap go for it. :D
 
I noticed a big difference running the MSD box over the toy igniter. Plus I went thru 2 toy units and my MSD never failed me.

Also if you run a stock toy tach you will need an adapter (#8920) to make it work.

But either 6a or 6al are both good durable units...
 

Latest posts

Random media

gear ring 005.jpg
tmp_23757-20161010_185648-1056695835.jpg
buggy1.JPG
IMG_20211214_150102.jpg
1570990317467.jpg
HPIM1634.jpg
Rugged Radios ECORS facebook photo 2013.jpg
HPIM2394.jpg
685643D6-D367-4FE2-BF86-E8A2B48CBB47.jpeg
Back
Top