I have a 1.75x.120 DOM chassis setup for LS engine/Th350/Atlas/Corbeau style seats and a rear mount radiator with coolant running through the chassis. It was built by SBC offroad in Gainsville,GA. I have been gathering parts for the last few months and working on it as time allows but have lost interest.
Parts:
-5.3 LS engine pulled from a 2002 Tahoe with 79k miles with wiring harness/cpu/front accessories and starter
-'78 Ford HP D60 4.10rp with Reid Knuckles, Branik HS Arms, fully trussed, and PSC 2.5x10" Ram for 45 degree steering. Axle is complete with stock parts minus knuckles.
-GM 14 bolt 4.10rp(factory brackets and spring mounts have been removed)
-PSC 11.3 Orbital
-8-Ruffstuff 1 1/4" Heims/misalignment/jam nuts
-8-Ruffstuff 7/8" heims/misalignment/jam nuts
-All necessary shock/link/mount tabs from Ruffstuff(Link tabs have all been drilled out to 3/4" bolt hole)
-New 3/4" Grade 8 hardware for links
$5050 obo
Parts:
-5.3 LS engine pulled from a 2002 Tahoe with 79k miles with wiring harness/cpu/front accessories and starter
-'78 Ford HP D60 4.10rp with Reid Knuckles, Branik HS Arms, fully trussed, and PSC 2.5x10" Ram for 45 degree steering. Axle is complete with stock parts minus knuckles.
-GM 14 bolt 4.10rp(factory brackets and spring mounts have been removed)
-PSC 11.3 Orbital
-8-Ruffstuff 1 1/4" Heims/misalignment/jam nuts
-8-Ruffstuff 7/8" heims/misalignment/jam nuts
-All necessary shock/link/mount tabs from Ruffstuff(Link tabs have all been drilled out to 3/4" bolt hole)
-New 3/4" Grade 8 hardware for links
$5050 obo
![photo[1].JPG](http://attachments.www.hardlinecrawlers.com/xfmg/thumbnail/1/1240-519e8cab4a0c605703a1d96e8dbb58d0.jpg?1625928166)
![IMG_3256[1].JPG](http://attachments.www.hardlinecrawlers.com/xfmg/thumbnail/4/4795-4d81b7c1a6a76881b4a8f8ea3a761b28.jpg?1625928482)
