Driveline length

[zukkev]

the length difference should be 4.75 inches, the most flexible cardan joint i have found is in the 79/80 trucks but the longer yoke shafts were in the second and third gen trucks, you almost always end up drilling the flanges or buying the triple drilled ones

I always thought the 79-80 trucks originally came with non CV fronts, I could be wrong... I have seen non Cv fronts only in this era of 1st gens, and they were 8mm holes, not 10mm...

 

[johneymav]

I always thought the 79-80 trucks originally came with non CV fronts, I could be wrong... I have seen non Cv fronts only in this era of 1st gens, and they were 8mm holes, not 10mm...

correct on the 8mm holes but those early trucks did have Double Cardans

 

[zukkev]

correct on the 8mm holes but those early trucks did have Double Cardans

Hmm...bet they are real hard to find then...

 

[CHOP SHOP]

Hmm...bet they are real hard to find then...

EVERY 1st gen I have parted or owned has had a cv front shaft.:awesomework:

 

[travisyota83]

EVERY 1st gen I have parted or owned has had a cv front shaft.:awesomework:

X2 i havent seen one yet with out one:corn: