Full hydro steering?

[TBItoy]

It's a cbr xr series. And I can get most of the fittings thru work, so that saves some money.

One of these days I'm going to have to shake your hand, you have answered a **** ton of questions for me here recently, thank you.

Yeah That's a high flow deal. I'm sure people are running -6 hose and fittings with it, but I wouldn't. A 90 degree -6 fitting can choke your flow enough that you can feel it at high speed, as in trying to crank the wheel and it just won't turn any faster.

I'm assuming you are running a 2.5" (or larger) ram and 160CC/Rev (or larger) orbital?

 

[Dirt700]

Yeah That's a high flow deal. I'm sure people are running -6 hose and fittings with it, but I wouldn't. A 90 degree -6 fitting can choke your flow enough that you can feel it at high speed, as in trying to crank the wheel and it just won't turn any faster.

I'm assuming you are running a 2.5" (or larger) ram and 160CC/Rev (or larger) orbital?

2.5x8 ram 156cc/9.7ci orbital

 

[waggener1]

2.5x8 ram 156cc/9.7ci orbital

How much steering angle can you achieve on your 05+ SD 60 with the 8in. stroke? What is the distance from your ball joint centerline to the heim joint centerline on your steering arm? I'll be going down this path in the next month or two.

 

[Dirt700]

How much steering angle can you achieve on your 05+ SD 60 with the 8in. stroke? What is the distance from your ball joint centerline to the heim joint centerline on your steering arm? I'll be going down this path in the next month or two.

Knuckles should be back next week, I hope. I can measure then and let you know. I will have rcv axles, so I'm hoping for around the 45° mark. BeerJ may chime in, he has a sd 60 front also, he probably knows the answer.

 

[leeadam94]

If you€™re running a high flow pump I€™d consider stepping up to -8 on pressure hoses and -10 on cooler hoses. Especially on with long hoses


Sent from my iPhone using Tapatalk

Yes I would highly suggest moving up to -8 fittings and hose for the whole system.


Sent from my iPhone using Tapatalk

 

[Dirt700]

Yes I would highly suggest moving up to -8 fittings and hose for the whole system.


Sent from my iPhone using Tapatalk

I got all my -8 fittings for orbital, I just have to get one 8mb x 10mj for orbital to res. And I need two 3/8 x-10 for res.

#8 hydraulic hose is pretty big

 

[Dirt700]

If anyone has a link to a 3/8 x -10 an for my cooler would be great. I have searched. I looked 10 jic and 5/8 jic also. I found a 3/8 x -8an was all

 

[Dirt700]

Well just talked to Lee, I will probably have to drill and res. for a larger whole. And I have to even see if this reservoir will fit it's 24"

 

[TBItoy]

If anyone has a link to a 3/8 x -10 an for my cooler would be great. I have searched. I looked 10 jic and 5/8 jic also. I found a 3/8 x -8an was all

https://www.discounthydraulichose.com/product_p/2404-10-06.htm

Discount hydraulic hose has everything


Sent from my iPhone using Tapatalk

 

[Dirt700]

https://www.discounthydraulichose.com/product_p/2404-10-06.htm

Discount hydraulic hose has everything


Sent from my iPhone using Tapatalk

Thanks, I was hoping you would chime in. Think I should drill out reservoir to help with flow, say 1/2 instead of 3/8