honda buggy

quickracer · Jan 9, 2013

marczuk said:
How much would it take to build one? If you don't mind me asking

sky's the limit like any other build,,like chromo's,lockers,hub gears,hydro,shocks,etc.....
i broke axle parts in the black buggy,,trunion bearings,birfs,thirds, etc..
you can do a cheap one for like 4,5k in parts...and go up from there...but honestly,that black one ,i had more fun in that buggy than any other buggy i built,,everything from rockwell buggies to sammi...that black honda buggy would go anywere i wanted it to go..it was more capable than i was..LOL

paradisepwoffrd drove i a couple times

biggin · Jan 11, 2013

Here is one im building for my kids. It will be using a 1.9 saturn engine and auto trans.

quickracer · Jan 11, 2013

biggin said:
Here is one im building for my kids. It will be using a 1.9 saturn engine and auto trans.

is the saturn 1.9 a reverse rotation??or are you going to flip the axles?

paradisepwoffrd · Jan 11, 2013

saturn would not be reverse rototation, so you would need to flip the axles or spin the engine around.

marczuk · Jan 11, 2013

Do u have a build thread on it? An could u fit two adults in it or
just kids?

Neal3000 · Jan 11, 2013

those axles don't look flipped in the pic

quickracer · Jan 11, 2013

paradisepwoffrd said:
saturn would not be reverse rototation, so you would need to flip the axles or spin the engine around.

thats what i was looking at,if ya spin the motor around,the diffs are on the wrong side?and it would be a longer wheelbase..

biggin · Jan 11, 2013

The axles are'nt flipped. The engine will face forward and both outputs from trans will be on the pass side, hence the wagoneer 44's. Those are 38tsl's on champion aluminum beadlocks with a wheelbase of 102".

biggin · Jan 11, 2013

I have a build thread over on pirate. Just search kids saturn buggy.

As far as adults fitting in it... I wasnt building it for that. Got 2 junior twisted stitch seats on the way just for the kiddos. My plans were to 4 link it but, to keep it cheap and simple, im gonna 1 link it with 1.25 ruffstuff joints and run a panhard front and rear. I already have the fox air shocks to go on it.

Oh and my kids are 6 and 9 booyang

And they both can drive the donor saturn like its been stole lol.

biggin · Jan 11, 2013

biggin · Jan 11, 2013

marczuk · Jan 11, 2013

Dude that is cool my little girl is 4 an she cannt wait to go crawling.
she rides around the house wit me. Well if any body has one of these
buggys an wants a toyota let me know....
But again sick little buggy

marczuk · Jun 28, 2013

One more? ??... does anyone have a build thread for a two seater
transaxle buggy. I still want one but my wife says it has to have two seats.

krackem · Jun 30, 2013

Honda b,d engines are linkage f,h,and k motors are cable shifters I still want to build one I built hondas for 10 years I'd do and lsvtec all motor with itb's, and had a crx with 260 hp and a hatch I built for a buddy that made 526 hp so you can make power outta them

marczuk · Jun 30, 2013

Yup great power an light. I haven't seen many two seaters idk
if it harder to do or what. But thers not many out ther

Rockrunner86 · Jul 2, 2013

Here is our Turbo'd H22a JDM two seat mid engine buggy. Its getting close to completed.

krackem · Jul 2, 2013

^^^^^^^^^ that thing kicks ass there. Ecu and harness you running man i it a painstakingly slow process cutting down the entire harness. Also is it tuned yet and what it make if so,

302_buggy · Jul 2, 2013

Re: Re: honda buggy

I'll start mine probably this winter I'll be using an f22 I got super cheap but im goin to do independent front and rear long travel suspension ive got a dana 30 35 I was thinkin bout cuttin up to get just the chunk tryin to do it super cheap with just the parts I have layin around want to run some 33s and keep it 80" wb and around 60" wide to rip up the rzr crowd

Sent from the middle of no where

302_buggy · Jul 2, 2013

Re: Re: honda buggy

Sent from the middle of no where

Rockrunner86 · Jul 2, 2013

krackem said:
^^^^^^^^^ that thing kicks ass there. Ecu and harness you running man i it a painstakingly slow process cutting down the entire harness. Also is it tuned yet and what it make if so,

Were in the wiring stage currently. We have a local tuner that is doing all the turbo tuning. Yes the wiring has been a bottle neck..