Intrest in F550 knuckles?

JDodd · Jan 24, 2017

Sorry guys I've been busy haven't kept yall updated.
I got enough interest to get enough made to drop the price down to $1500 a pair. I am going to have a couple sets left over, you can send me a message if you're interested.

whiskeymakin · Jan 24, 2017

These will fit either inner c? 250/350 and the 450/550

TBItoy · Jan 24, 2017

whiskeymakin said:
These will fit either inner c? 250/350 and the 450/550

It's a knuckle - C combo. Not just a knuckle

Welderd · Jan 24, 2017

I have the weaver fab rear cups and they are great

I designed some up and called around to get them machined and couldn't get them made for less because of the size they need to be and quantity. I'd like to see some competition in that market to get the price down for such a simple part. Spidertrax isn't even going to do it because they invested in their ultimate UB.

Beerj · Jan 24, 2017

I just wish someone made a reasonably priced hub drilled and studded for 8x6.5

TBItoy · Jan 24, 2017

Beerj said:
I just wish someone made a reasonably priced hub drilled and studded for 8x6.5

I just wish everyone would start transitioning to 8x170!

wizzo · Jan 24, 2017

TBItoy said:
I just wish everyone would start transitioning to 8x170!

That is my plan!

redneckengineered · Jan 26, 2017

wizzo said:
That is my plan!

commie bastard

TBItoy · Jan 26, 2017

redneckengineered said:
commie bastard

8 x 6.693" then

:flipoff1:

Beerj · Jan 26, 2017

TBItoy said:
8 x 6.693" then

I dunno man, I still see a decimal. Should be 6 and 693/1000

whiskeymakin · Jan 27, 2017

Then the 8x180 will be next molaugh

TBItoy · Jan 27, 2017

whiskeymakin said:
Then the 8x180 will be next

Isn't that just new GM stuff? :dunno:

That IFS'll never take off laughing1

FORDTECHGURU · Feb 1, 2017

Hey guys, I wish I could sell the unit cups for less too but i cant. I would lose $$ on them. Start with a 7x7x3" solid chunk of steel and whittle almost all of it away. It takes alot of time and makes alot of chips. Time is money, period. A forging would be cheaper per part but over 30k in die sets alone, no thanks.
Meanwhile we have u.s.a. made, on the shelf, available cups when you are ready. We also have drive flange kits in 35 and 40 spline!
Our unit cups weigh 8 lbs each, drive flanges are 6lbs and a stock 05up unit bearing is 25 lbs each, thanks cj