Newbies Post Up Here - Rig Specs & Info Thread

[85buggy]

Sent from my iPhone using Tapatalk

 

[85buggy]

Toyota based buggy. On propane 4.7 in the tcase. Changing to 4.88s has welded front and rear. 42 tsls has a new paint job and getting new sheet metal. Changing from black and blue to grey and black to match my tow rig better. The no fat girls thing is just light hearted humor to draw attention mostly looking to ride new places this year. We try to ride atleast once a month.


Sent from my iPhone using Tapatalk

 

[Mattman347]

New guy here just wanted to say hi from middle TN!! Met a few guys this weekend down at Holly Tree offroad park and they told me about this site. The rig is just a 94 explorer with whats in my signature. Here is a few pics from Harlan KY last year.

 

[smbroady82]

Mattman347
Hey man, thanks so much again for the help this past weekend, I came back sunday and got it fixed up in an hour or two sunday and drove it out.

(Great guy everybody!, He was wheeling with his small son and stopped and helped us for a few hours last saturday when my toyota front end had a come apart)

Thanks again Matt !
Broady

. . . And I need to do one of these soon I guess

 

[RBx]

I am from Baltimore.
I have an 88 4Runner 3.slo, a few mods
I am on Yotatech mostly...build thread www.yotatech.com/f199/rbx-1988-4runner-build-up-thread-221587/index55.html
I like to modify stuff

 

[bigjerm]

New here but lurk all the time.

Current rig 2006 LJ with 30k miles on it. Metalcloaks, 2" lift, 1" BL 35's blah blah blah. Either going to do a 4:1 and get some fun mods or sell it for something a little less nice or a rzr.

 

[Eldo Crawler]

This has been my rig for the last couple of years. Not as strong as I would like but she normally gets the job done! And she's stable as can be!

98 TJ, 4.0, auto, Tera 4:1, Tom Woods shafts front & rear, rear is 4 linked with upper links channeled into the floor to allow for super low COG, 9 inch, pinion guard, full spool, 35 spline chromolys, 5.13's, 3 linked front, Dana 44, chromoly shafts, super joints, Detroit, hydro assist w/PSC, high steer w/chromoly hiems, 38.5x14.5 SX on Champion bead locks, full cage thru to frame, Corbeau seats front & rear, boat sides, custom flat high line fenders, belly up skid from engine to back of t-case, Fox coil overs, Warn 9000 painted to match, synthetic rope, '08 Challenger Orange.

 

[johneddie]

Nice rig there!

 

[kaker123]

been registered for a while, finally got around to posting

im Chris Kaker from Cabot, been wheeling for a few years and into offroad stuff for many years

my rig is a 93 XJ thrown together to be simple and capable till the buggy is done wich might be a while
specs are 4.0/aw4/np231 sye, d30 with wj knuckle/brakes and spartan/ rear d44 welded running 34 10.50 17 LTB's on 17x6.5" steelies, rusty's long arm upgrade front and pieced together rear.
with a total of 2k$ it is perfect for me to gain some much needed wheelin experience.

 

[P.R.85]

Well first time even posting here. I have offroaded some in the past, not near as much as i would like to, but some. I am the perfect definition of a "newb". Lookin to gain some knowledge about all this offroad stuff, spent the last couple years modding diesel trucks and never did much offroad stuff. But the time has come! I bought a 1st gen yoter a while back, just used on the farm. Traded last week for an 85 yoter. Got some big plans for this one. Gonna be far from a hardlinecrawler like most of you have. But i just want a rig i can take fishing and camping, and up some trails every now and then. Well sorry to bore all of you, but here are some pics of the truck.

 

[zjtrey]

Hey Guys...Name is Trey, I live in Waynesville NC... Been lurking and posting here for a year or so. Most of the time we're out wheeling and don't stop long enough to take pics n such. Heres a couple from Windrock last weekend, if you haven't been to windrock in a while you better check it out because they are putting alot of money back into the place and there's a bunch of new trails and the old ones will still kick your ass...

Anyway this is my pile of parts... started its like a zj.. you can see whats left.. NOT MUCH hahaha but she gets the job done just fine. She's 100% built by me so its my fault when the **** hits the fan!

I'm running a 5.3 np435/205 shaved 14b and 60 with some goodies to keep her together

Hardline is a cool group of folks, :****: hope to meet some of ya'll out wheelin sometime. Our group will hopefully be making it out to some of the Alabama parks this year so hollar if you see us.

 

[Capecj8]

Hey Now......
Been New England Wheeling for years. Cape Cod MA.
Currently ogling my bosses M&M Chassis #21.
Here's a few shots of my fleet history. Blue Scrambler is F/S.
I dIg Guns, Girls and Bourbon.


My first '81 Scrambler stock sans a mild 305 and 31's

My 92 YJ 4" lift 33's with the new 8 in the background

My current 92', 5.0, auto, atlas, 37's

in 2000 my 81 scrambler 304/th400/d20 on 36's and my '84 CJ7 350,th350/300, 36's

My current F/S/FT

 

[Loomis]

My name is Jesse and I reside in Washington. My rig is a 78 FJ40 on tons, SB350/TH350/Lomax 205 twinsticked, linked on coils, full hydro, 107"wb, 39.5" Boogers

 

[ridered3]

^^^ Pretty sure my buddy used to own that truck, was a good truck when he had it. It got a bullet hole in the hood (from the under side) and one in the firewall? He replaced alot of maintenance type stuff on it and got it in good mechanical shape while he had it.

Just saw this post. It does in fact have a bullet hole on the hood, which explains a lot! By chance do you have a name and contact number of your buddy? It was an Alabama title, in the name of a fella named Corey who bought it from the title holder Curtis. Would like to get it titled etc, in my name. Any info would be AWESOME!!!!

 

[TacomaJD]

Re: Re: Re: Newbies Post Up Here - Rig Specs & Info Thread

Just saw this post. It does in fact have a bullet hole on the hood, which explains a lot! By chance do you have a name and contact number of your buddy? It was an Alabama title, in the name of a fella named Corey who bought it from the title holder Curtis. Would like to get it titled etc, in my name. Any info would be AWESOME!!!!

Will send pm.

Sent from my ADR6425LVW

 

[fomoco365]

My name is Daniel Hardee. I was born and raised in Jackson, TN. I got into wheeling about 10 years ago when I got my '79 Bronco. After breaking several things on it over 3 or 4 years, I got frustrated and quit going. A couple of months ago a buddy of mine asked me if I wanted to ride with him, and I got bit by the bug once again.

I traded for my current rigs in the same week.

'85 Toyota

'94 Ranger

 

[railman]

John Barnett from Madisonville, KY

1996 Ford Ranger, 4.0, auto, doubler, KP D60 with 4.88's, D60 rear with 4.88's, welded both ends, 39.5 Iroks on 17" Allied beadlocks, leaves front and rear......

l8r, John 8)

 

[stano]

Well, Newby to the site, not to 4 wheeling. Been lurking and reading over here off and on for awhile. Spent lots of time on other 4x4 sites and like the tech and suggestions here. Had a Little YJ for years, wheeled and wrenched it to death, then got the buggy bug. Parted out said YJ and am in the middle of the Buggy build.

Here is where I am at now

Here is where it is headed

Specs 5.3HO, Turbo 350, Rubi case, SD 60 front narrowed 4", Narrow track 60 rear

 

[dumpinthegutter]

Here's my rig. Toyota Truggy. 60/14 detroits, 350/350, 203/205, 42s, propane...

 

[Boz]

I am Boz. I have been lurking for a week or two. Joined the other day. I see a few familiar names from another TN based board.

'75 K5

D60/D70 DRW with 5.13's & detroits. H-1's with 42's. 540 Cadillac Stroker, T-400, 203/205 Doubler.