Not another Chevy Boatside.

Cole · May 13, 2008

lookin good, when you gonna take it out and beat on it?

Marty · May 13, 2008

Thanks, as soon as a swap to the LS1 Oil pan. Some guys from here are going to Harlan soon, but I doubt it will be ready.

Marty · May 13, 2008

Got a little bit done. Floor is done on the drivers side, deoasnt look great cause I was using .035 wire, but it will be flap disked and covered back with shitty herculiner. P side is tacked in, the supports are a little different height then the drivers beacuse of the mount for my 205/skidplate, but Im not perfect. Now I am gunna go do the floors on the other side, gunna be a long night.

P · May 14, 2008

Coming along very nicely... Thats a gonna be a sweet rig man !

Marty · May 14, 2008

Thanks P. Got the other side floor done. Just need gussets and tabs to mount seats. I think I the front ever gets linked, I will add another supports right by the body mount, where the shackle is now. Probably have updates this weekend, stay tuned.

Cole · May 14, 2008

Man you should be done by now. I know you don't have anything else to do in Boone. :flipoff1:

Marty · May 14, 2008

I would be done, except I dont have my tabs yet, and copperhead fab sent me the wrong gussets :flipoff1:

After that, and some paint I will be done. Then its the LS1 pan. Then Hopefully woodlee will make some time for me for the cage

blacksheep10 · May 15, 2008

Marty said:
I would be done, except I dont have my tabs yet, and copperhead fab sent me the wrong gussets After that, and some paint I will be done. Then its the LS1 pan. Then Hopefully woodlee will make some time for me for the cage

I burn tabs and gussets :flipoff1:

Marty · May 15, 2008

Well I did not know that ??? I will hit you up when I need more!!

Marty · May 16, 2008

ewww fresh herculiner

Hoping the seat tabs will come tomorrow. At first I wasnt planning on skinning the sides, but I went and measured, and all I need is a 4x4 piece of UHMW cut exactly down the middle, so thats easy, probly what I will end up using.

Juan_Hong_Loe · May 16, 2008

Marty · May 16, 2008

Juan_Hong_Loe said:
gay!

very

Marty · May 19, 2008

Got the gussets today and burned them in. Should have the seat tabs soon, tomorrow I am going to pick up a piece of UHMW for the sides. Then I will be almost done.

drycreekjeep · May 19, 2008

lookin great!!!!!

3 tons o fun · May 20, 2008

Marty said:

That's kind of an odd place to put you art carr.How hard is it going to be to shift? :flipoff1:

Marty · May 20, 2008

Yea, Since I cheaped out and didnt get a RVMB I wanted the reverse pattern, so I turned the shifter around laughing1

P · May 21, 2008

Marty... since your Art Carr isnt mounted do me a favor Give me the overall length of it plastic cover and all .

I want to go to this shifter eventually because its hard to see the tiny gear select numbers and pointer on the B&M ratchet shifter Im currently using and were I have / need it mounted in my buggy. If this is shorter ( which I recall it being from Joe's and being in Matt O's buggy) It would only help matters in reach and so forth for my application.

In fact Im about to go post that B&M for sale laughing1