NOVI FED COUPE
Well-Known Member
- Joined
- Nov 10, 2009
- Messages
- 1,748
- Reaction score
- 9
Where are you located in GA?slravenel said:
-
Help Support Hardline Crawlers :
Partially Committed Racing's buggy #004 build
- Thread starter slravenel
- Start date
slravenel
Well-Known Member
NOVI FED COUPE said:
Atlanta
NOVI FED COUPE
Well-Known Member
- Joined
- Nov 10, 2009
- Messages
- 1,748
- Reaction score
- 9
slravenel said:
Gotcha...I am just down the road in Madison. Awesome build!
617_Racing
Well-Known Member
slravenel said:
What part of Atlanta? I'm in Stockbridge/McDonough area.
Sent from my iPhone using Tapatalk
slravenel
Well-Known Member
617_Racing said:
the guy that is the other 2 hands in the build is from McDonough...but I am intown Atlanta, near Little 5 Points / EAV
slravenel
Well-Known Member
some crazy camera trickery going on here...its not purple laughing1
Its a deep royal blue that looks purple in the pictures for some reason...and it looks way different on the computer vs iphone too, so I dunno what kind of sorcery witch powdercoat Todd put on this chassis
Who cares...its on now! The fun part is next
Its a deep royal blue that looks purple in the pictures for some reason...and it looks way different on the computer vs iphone too, so I dunno what kind of sorcery witch powdercoat Todd put on this chassis
Who cares...its on now! The fun part is next
ridered3
Not Rigless
New build is coming along nicely 
Also was a cool write up on yalls other buggies in the recent issue of Rock Sports Quarterly.
Also was a cool write up on yalls other buggies in the recent issue of Rock Sports Quarterly.
wayne86
Well-Known Member
Looks really good! What color on the body and panels?
slravenel
Well-Known Member
I dont know the exact name of it, I will find out though.
Here is another few showing it a little better and with the interior panel color (silver vein)...but its still purple looking on the computer, but not on my iphone...
Here is another few showing it a little better and with the interior panel color (silver vein)...but its still purple looking on the computer, but not on my iphone...
Chassis is a prismatic powder called illusion royal. The interior panels are silver vien with a clear top coat. The exterior panels are getting painted a toyota color dark grey mica. Here's a swatch of the panel color.
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
slravenel
Well-Known Member
I promise its blue 
We got the chassis unloaded and in the shop on Saturday. Got the motor put in place, the airbumps in their mounts (always a big PITA), rear axle is in, rear shocks are in... this weekend we are going to try and tackle the front axle and get its new mounts tacked on it and cycled to make sure it all clears - then hopefully get the trans and tcase in place as well. So far, so good!
We got the chassis unloaded and in the shop on Saturday. Got the motor put in place, the airbumps in their mounts (always a big PITA), rear axle is in, rear shocks are in... this weekend we are going to try and tackle the front axle and get its new mounts tacked on it and cycled to make sure it all clears - then hopefully get the trans and tcase in place as well. So far, so good!
slravenel
Well-Known Member
Got the rest of the drivetrain in this past weekend along with starting to bolt on some of the other major accessories.
Slung the dash in there too so we could start to see how things were laying out and really looking with the interior color choice
Had a little bit easier of a day with the 14bolt this time, after its all said and done with shock mounts and all, it looks like we only lost about a 1/4" of uptravel which is awesome. Still have yet to cycle it fully so we arent totally sure about the driveshaft bind at full droop yet (built with a HP60 but now using a LP14 front), but can fix that when we cross that bridge if need be. We might get away with it like it is.
Todd chose the skin color (tested it on the fuel cell) and I think its going to look good - there is still a little camera trickery going on here, the grey is a little lighter in person
Started to get the interior panels going, but ran out of time so we will get after that next weekend
The garage guard approves
Slung the dash in there too so we could start to see how things were laying out and really looking with the interior color choice
Had a little bit easier of a day with the 14bolt this time, after its all said and done with shock mounts and all, it looks like we only lost about a 1/4" of uptravel which is awesome. Still have yet to cycle it fully so we arent totally sure about the driveshaft bind at full droop yet (built with a HP60 but now using a LP14 front), but can fix that when we cross that bridge if need be. We might get away with it like it is.
Todd chose the skin color (tested it on the fuel cell) and I think its going to look good - there is still a little camera trickery going on here, the grey is a little lighter in person
Started to get the interior panels going, but ran out of time so we will get after that next weekend
The garage guard approves
wizzo
Well-Known Member
Looking good! 
redneckengineered
Trailer Park Panty Dropper
- Joined
- Oct 13, 2008
- Messages
- 2,287
- Reaction score
- 299
Is this the color Todd picked for the chassis?
https://www.prismaticpowders.com/shop/powder-coating-colors/PPB-2203/chic-purple
https://www.prismaticpowders.com/shop/powder-coating-colors/PPB-2203/chic-purple
slravenel
Well-Known Member
redneckengineered said:
I think its more like this
smbroady82
Well-Known Member
wizzo said:Looking good!
x2
redneckengineered
Trailer Park Panty Dropper
- Joined
- Oct 13, 2008
- Messages
- 2,287
- Reaction score
- 299
blurple
