Project "Secret Squirrel"

Not Jobless · Aug 22, 2007

50 pages and that turd ain't done yet :haha: :fawkdancesmiley:

Jeepless · Aug 22, 2007

crash said:
Also jack---here is your center bar on the top of the cage :redneck: Oh and I tacked the other bar back on :haha:

:haha: If you could just control you strenth! Looks GREAT Mike. I have some goodies at the house for you too.

crash2 · Aug 22, 2007

Jobless said:
50 pages and that turd ain't done yet :haha: :fawkdancesmiley:

Maybe--maybe not :redneck:

sixty-nine · Aug 23, 2007

Jobless said:
50 pages and that turd ain't done yet :haha: :fawkdancesmiley:

50 pages:eeek: i only see 13:looser: :fawkdancesmiley:

crash2 · Aug 24, 2007

Here is the dash bar.

Unfortunately with where it sits you won't be able to see the dummy lights but I had no choice :booo:

Some more tube.

Jeepless · Aug 24, 2007

I like the dash bar its in there nice and tight!

NO dummy gauges needed....did you wire them back in?

I got the electric fan and it is under 3inches thick as requested.:redneck:

OH and good work man, tis coming along nicely!!!:awesomework:

Six-Nine · Aug 24, 2007

Looks good, are you done yet! :haha:

crash2 · Aug 24, 2007

Jeepless said:
I like the dash bar its in there nice and tight!

NO dummy gauges needed....did you wire them back in?

I got the electric fan and it is under 3inches thick as requested.:redneck:

OH and good work man, tis coming along nicely!!!:awesomework:

I think the only thing wired in is the ses lamp but we can fix that with some indicator lamps when I get to that point.. Perfect-- when you get a chance can you give me a true measurement on thickness of the fan and width. Also is it a pusher or puller?

crash2 · Aug 24, 2007

Six-Nine said:
Looks good, are you done yet! :haha:

:fawkdancesmiley: :fawkdancesmiley: I am pushing for a month to being done--- I know gibby wants his done asep too so I am a workin away :awesomework:

hwcurtice · Aug 24, 2007

crash said:
Here is the dash bar.

Unfortunately with where it sits you won't be able to see the dummy lights but I had no choice :booo:

Dang steering column. They just want to be where they are...

Some more tube.

crash said:

You're never gonna get those door to fit now..... :awesomework:

Jeepless · Aug 24, 2007

crash said:
I think the only thing wired in is the ses lamp but we can fix that with some indicator lamps when I get to that point.. Perfect-- when you get a chance can you give me a true measurement on thickness of the fan and width. Also is it a pusher or puller?

It is coming as a puller but can be swicthed if we so choose. These are the measurements given, and will follow up with actual when it arives(date change by shipping company....AGAIN)
11.9X12.1X2.5 THICK

81K20 · Aug 27, 2007

its lookin good. you really think this thing will be done before i get home in a lil over a month? i'd love to see this thing in action.

crash2 · Aug 28, 2007

81K20 said:
its lookin good. you really think this thing will be done before i get home in a lil over a month? i'd love to see this thing in action.

I am pushing for it......

crash2 · Aug 28, 2007

So I am putting along. Got some more tube work done.... Got some short corner pieces/handles and few mounting tubes to do still.

So at this point I decided to switch ---- decided to go ahead and get the rear suspension done. I built a rear cross member and tied it into the frame/tube work. At this point I relized I had cut like 4" too much off the frame rails so I ended up doing a lil more gusset work but I was happy with how it turned out.

And I think jack will be happy to see these finally sitting here :redneck:

But I have the uppers measured so its just a matter of making tabs and its a done deal...

sixty-nine · Aug 28, 2007

your work supercedes most peoples expectations. i for one am in complete awe. jacks rig is bad ass:awesomework:

Jeepless · Aug 28, 2007

HOLY ****! Wasn't expecting this today, its gonna roll on its own soon.:cheer: I will come out, anyone want to push me around the block a few times so I can make the vrrrm vrrrm noises?

Mike I think the rear of the frame looks great.

What is the wheel base now?