Random Thoughts

joho75287 · Mar 23, 2016

Re: Random Thoughts

That crow should be awarded something shiny. That's a hell of a bombing run!! Laser guided ****...

Beerj · Mar 23, 2016

Re: Random Thoughts

No doubt! When I saw them fly I heard the surrounding area start getting pelted. I figured I should take cover and BAM! Man down. :****:

joho75287 · Mar 23, 2016

Re: Random Thoughts

Beerj said:
No doubt! When I saw them fly I heard the surrounding area start getting pelted. I figured I should take cover and BAM! Man down. :****:

I'M HIT I'M HIT!!! Corpsman!!!!! LOL

El Diablo · Mar 23, 2016

Re: Random Thoughts

j-mox said:
We rotate days/nights each time we go in. 7am/pm-7:30am/pm

Ex. Monday-Tuesday day shift; off Wednesday-Thursday; Friday, Saturday, Sunday nights; off Monday-Tuesday; Wednesday-Thursday days; off Friday, Saturday, Sunday. Its a constant rotation. Work 2 weekends a month and off 2. Now that schedule will throw you body off!

This is the same shift we work it's called a 3 2 shift we work it running 12 hour shifts 6-6.
We have two day shift and two night shifts no swinging.
Did to much of that when the plant started worked one week on days one week on second and then one week on nights and that sucked.

TBItoy · Mar 23, 2016

Re:

Water heater line blew apart. Flooded garage. Pain in the ass, but the floor is super clean now.

Win?

Badride · Mar 23, 2016

Re: Random Thoughts

TBItoy said:
Water heater line blew apart. Flooded garage. Pain in the ass, but the floor is super clean now.

Win?

Did it hurt anything else?

If no. Then yes it is a win !

lowbudgetjunk · Mar 23, 2016

Re: Random Thoughts

Beerj said:
No doubt! When I saw them fly I heard the surrounding area start getting pelted. I figured I should take cover and BAM! Man down. :****:

It didn't even hit the hole you drink out of....should have been fine :dunno:

5BrothersFabrication · Mar 23, 2016

Re: Random Thoughts

lowbudgetjunk said:
It didn't even hit the hole you drink out of....should have been fine

I would have drawn a sharpie no-go zone on the cup, took the lid off and wore it out anyway.

El Diablo said:
This is the same shift we work it's called a 3 2 shift we work it running 12 hour shifts 6-6.
We have two day shift and two night shifts no swinging.
Did to much of that when the plant started worked one week on days one week on second and then one week on nights and that sucked.

My wife used to work a split like that. Work mon,tues, off wed,thur, work fri,sat,sun, and reverse that for the next week. Having RJ when he was a baby while she was on that shift was an every other weekend ruiner. He was too little to take wheelin, or almost any garage activity for that matter. I told her to apply for that school nurse job or go work at a Dr's office or something, and she works as a school nurse now, only 200 days a year, but now I work almost every Saturday 7am-noon. It's an extra $140 on the ol' paycheck. :woot:

TBItoy · Mar 23, 2016

Re: Re: Random Thoughts

Badride said:
Did it hurt anything else?

If no. Then yes it is a win !

Slab house, so the carpet got a bit wet by the back door 2' or so. If I can get that dry then I'm good.

Also, just stopped by lowes and bought 2 new hoses and a heavy duty entrance rug..... All Made in USA.

94xjsport94 · Mar 23, 2016

Re: Random Thoughts

Random thought. How did people think before languages?

Beerj · Mar 23, 2016

Re: Random Thoughts

5BrothersFabrication said:
I would have drawn a sharpie no-go zone on the cup, took the lid off and wore it out anyway.

lowbudgetjunk said:
It didn't even hit the hole you drink out of....should have been fine

Nope!

http://www.smithsonianmag.com/smart-news/brain-eating-crows-may-help-spread-prion-diseases-80669156/

44BRAND · Mar 23, 2016

Re: Random Thoughts

That coffee cup bombing run was some nasty ****, pun intended I reckon. Peel off the lid and let her rip.

John Galbreath Jr. · Mar 23, 2016

Re: Random Thoughts

Why does the phone ring EVERYTIME when you are packing wheel bearings?

TacomaJD · Mar 23, 2016

Re: Re: Random Thoughts

TBItoy said:
Slab house, so the carpet got a bit wet by the back door 2' or so. If I can get that dry then I'm good.

Also, just stopped by lowes and bought 2 new hoses and a heavy duty entrance rug..... All Made in USA.

I left my washer running one time when I went to eat with some friends, stayed gone longer than I had planned - 3 hours, came home, and washer been running water ever since. Linoleum in the washroom, carpet out in the hall. Luckily, most the water was funneling down the central unit vent. I cut the washer off, squeegee'd the rest of it down the vent, and it looked like it only soaked the carpet about 3' outward. I damped it up with several bath towels, then turned a small fan on blowing on it. It dried pretty fast, never had any problems water damage related. I guess the central vent duct had a hole in it or something somewhere, not sure how or where all that water drained out at under the house.

Moral of the story, don't run washer or dryer unless you are home....

zukimaster · Mar 23, 2016

Re:

Make sure your rig is in gear before you crank it! Been working on it and had it out of gear, forgot! Reached in and started it, and before I could cut it off, it ran into the new rig I'm building, knocking it off the jack stands and almost turning it over before I got it stopped! There went about 2 hours worth of leveling.

Sent from my XT1080 using Tapatalk

85toyo · Mar 23, 2016

Re:

zukimaster said:
Make sure your rig is in gear before you crank it! Been working on it and had it out of gear, forgot! Reached in and started it, and before I could cut it off, it ran into the new rig I'm building, knocking it off the jack stands and almost turning it over before I got it stopped! There went about 2 hours worth of leveling.

Sent from my XT1080 using Tapatalk

I've been considering a neutral safety switch for this reason.

Eddyj · Mar 23, 2016

Re:

zukimaster said:
Make sure your rig is in gear before you crank it! Been working on it and had it out of gear, forgot! Reached in and started it, and before I could cut it off, it ran into the new rig I'm building, knocking it off the jack stands and almost turning it over before I got it stopped! There went about 2 hours worth of leveling.

Sent from my XT1080 using Tapatalk

Pics of new rig?

TacomaJD · Mar 23, 2016

Re:

zukimaster said:
Make sure your rig is in gear before you crank it! Been working on it and had it out of gear, forgot! Reached in and started it, and before I could cut it off, it ran into the new rig I'm building, knocking it off the jack stands and almost turning it over before I got it stopped! There went about 2 hours worth of leveling.

Sent from my XT1080 using Tapatalk

Fawk me, that's awesome. I wish I could've been there to hear you cuss molaugh

Jon Piper · Mar 23, 2016

Re:

zukimaster said:
Make sure your rig is in gear before you crank it! Been working on it and had it out of gear, forgot! Reached in and started it, and before I could cut it off, it ran into the new rig I'm building, knocking it off the jack stands and almost turning it over before I got it stopped! There went about 2 hours worth of leveling.

Sent from my XT1080 using Tapatalk

I ran over my trailer tool box this way ....... Man I was pissed