• Help Support Hardline Crawlers :

Sami Project

BigBoysToys

Well-Known Member
Joined
Nov 6, 2006
Messages
88
Location
Wenatchee
This is my new project 87 Sami gonna give it a Toyota 22r toy transfercase and tranny and 85 toy axles. Should be a fun project.
Custom dentwork (previous owner):redneck:
sami2.jpg

Custom paintwork (previous owner):redneck:
NewImage.jpg

Changing front axle to 85 toy axle
sami3.jpg

:D
sami4.jpg

Next get the rear ready for toyota axle pull the sami motor tranni and tcase and get ready for the toyota parts.
 
Looks a little uneven maybe I should fix that:bananadance:
100_4224.jpg

Toy axle minus stock perches
100_4226.jpg

Last time we will see the stock axle under there
100_4227.jpg

:D
100_4228.jpg

:D
100_4229.jpg

:D
100_4230.jpg

:011: Dont pay attention to the pink sidekick seat from toyzuki :puke:
100_4242.jpg
 
We got the brake lines and a temperary drag link on today just to get it around the garage. The plan is to keep it cheap and beat the piss out of it. We've got alot of leftover parts from previous builds so its getting a 22r, 5sp,and case from an '85(harness, computer, and possibly pedal ass.). and I picked up another top shift today. All for free
 
:D In the end it should be a $250 sami built from spare Toyota leftover parts. Hopefully with duel cases if can figure how to make it work. Exocage new paint and bodywork to make it look pretty once, then wheel the **** out of it, roll it on the rocks and see how far it can fly at the sand dunes.
 
Well works been a little slow do to my real job. But got a w56 Toyota tranny, A second case for the duel cases, 93 Toyota power steering box and pump, EFI head and more to still come.

Kids playing
100_4248.jpg

100_4251.jpg


Stock Sami Vs
100_4252.jpg


Motors gone
100_4257.jpg

100_4259.jpg

100_4267.jpg


EFI head and intake
100_4260.jpg


TCases
100_4261.jpg

100_4262.jpg


Power Steering
100_4263.jpg


Yota Springs
100_4268.jpg


Started trying to make it fit today got some trimming to do to the tunnel
100_4264.jpg

100_4265.jpg

100_4266.jpg
 
Started toyota spring swap fpr front of sami with brackets touzuki built THANKS now just have to get the measurements for a double shackle and build the shackles.
3-31-08033.jpg


Moved the center pin forward 1 1/2 to move the axle forward
3-31-08031.jpg


Need to weld a 2x4 across the front of the frame rails for the double shackle.
3-31-08032.jpg


Mocked into place for measurements
3-31-08035.jpg
 
Got the toyota front leaf springs in the back of the Sami.
100_5054.jpg

100_5056.jpg

100_5055.jpg

Got the motor bolted up to the tranny but I put the mounts for the motor are welded in the wrong spot on the frame so I have to move them.
100_5052.jpg

100_5051.jpg

Got the motor mounts moved and the motor bolted in today.
100_5059.jpg

100_5060.jpg

100_5058.jpg

100_5057.jpg

100_5061.jpg

100_5062.jpg

100_5066.jpg

I also modified the grill a little for some originality.

BEFORE:
100_5053.jpg


AFTER:
100_5069.jpg

100_5071.jpg
 
Good build. You should be happy with it. I have a few pointers if your interseted. I have done 5 of these swaps and doing another right now.
 

Latest posts

Back
Top