SAS S-10 4dr blazer

[MATCHBOX]

Alright so got a 95 S-10 blazer, 4.3L vortec and have access to a ford high pinion 44 front and 9" rear. Has any one done this swap? PIC'S would be cool to.

 

[Mallcrawler83]

check out pirate 4x4 chevy section, search sas s10:awesomework:

 

[Totalled]

Pretty sure Ed from dogpound did this.

 

[jeepdarinx]

buddy of mine put a dana 30 under a 92 once, turned out

 

[traildemon]

buddy of mine put a dana 30 under a 92 once, turned out

the only place a dana 30 looks good is under a scrap metal pile

 

[redrocket1]

www.s10extremist.org tons of pictures and info I'll try and take some pictures of my 88 when I get home tonight. Is that the one you've been trying to sell?

 

[Boonie Buster]

Had the exact axles under my '84.....:stirpot:

 

[jeepdarinx]

It was his gf daily driver, dana 30 plenty for her.

 

[!ton327]

did it to my pickup but use a chevy dana 60 sky manufacture sells a sas kit for s10s

 

[JAWS]

I did a v8 sas swap on one years ago. Used a 80-86 waggy front 44. And waggy front springs with the offset center pin. Turned out good.

 

[MATCHBOX]

the only place a dana 30 looks good is under a scrap metal pile

Not to be a **** but go talk crap on some one elses post thanks!

 

[MATCHBOX]

check out pirate 4x4 chevy section, search sas s10:awesomework:

Thanks for the info

 

[MATCHBOX]

www.s10extremist.org tons of pictures and info I'll try and take some pictures of my 88 when I get home tonight. Is that the one you've been trying to sell?

Yes it is gonna wheel it and thanks for info. Can use all the infor

 

[MATCHBOX]

Not sure yet on leafs or coils. Gonna take all the infor and just do the reach. I checked out sky but gonna see if they will make it with out there name in it. I think Im use the axles I've got. If any one has some pics that would be cool.

 

[redrocket1]

Sky will do it without their name you just have to remember to ask unlike myself. If you want to keep it low go with coils or coilovers if you want it cheap go leafs. I'm kicking myself for not going coilovers up front because with leaves there's only so high you can go with the rear mount because of the frame design.

 

[DiRtY Bill]

Pretty sure Ed from dogpound did this.

he used the stock rear end and a waggy low pinion d-44 front.

 

[MATCHBOX]

All right change of plans. Picked up a 69 chevy K-5. Fully chaged by M/T off road back in the 70's. Gonna put the 4.3 in it. :awesomework:

 

[dirtygoat]

All right change of plans. Picked up a 69 chevy K-5. Fully chaged by M/T off road back in the 70's. Gonna put the 4.3 in it. :awesomework:

Pics???:corn:

 

[MATCHBOX]

Will take some tomorrow and post them.

 

[MATCHBOX]

Here is what Im starting with. Might put a 454 in it not sure yet.