highgearonly
Member
- Joined
- Nov 19, 2019
- Messages
- 12
- Reaction score
- 1
Tera HP 60 CRD rear axle for sale. This uses Dana 60 HP gears, but bottom of axle is rotated to improve clearance. Been a great axle, had behind 4.3 V6 and 5.3 V8 with no issues.
Axle is 62" WMS-WMS, but comes with 2" spacers on each side for 66" WMS-WMS. So can be either width.
5 X 5.5" lug pattern
ARB locker
4.88 gears
35 spline chromoly semi-float axle shafts set 20 bearings
Set up for 4 link, sway bar arm mount tabs, coil over mount tabs.
No brakes, but set up for Spidertrax 14" rotors with wilwood calipers. Mounts and brackets can easily be removed to run other brake setups.
1410 yoke, but probably have a 1350 somewhere if you would rather have that
Located in McDonough GA area
Prefer local pick up, or can meet near Atl area. Could bring to event at off road park as well.
Text with any questions 678 596-9332
$1200 OBO
Axle is 62" WMS-WMS, but comes with 2" spacers on each side for 66" WMS-WMS. So can be either width.
5 X 5.5" lug pattern
ARB locker
4.88 gears
35 spline chromoly semi-float axle shafts set 20 bearings
Set up for 4 link, sway bar arm mount tabs, coil over mount tabs.
No brakes, but set up for Spidertrax 14" rotors with wilwood calipers. Mounts and brackets can easily be removed to run other brake setups.
1410 yoke, but probably have a 1350 somewhere if you would rather have that
Located in McDonough GA area
Prefer local pick up, or can meet near Atl area. Could bring to event at off road park as well.
Text with any questions 678 596-9332
$1200 OBO
Attachments
Last edited:
![IMG_9674[1].JPG](http://attachments.www.hardlinecrawlers.com/xfmg/thumbnail/13/13646-4f04ff796cf15d1f9ce563b9225b8370.jpg?1625929947)