What front axle shafts you running?

[tnford88]

Re:

Yukon's front HP kingpin 60 with stock 14b rear.

 

[onepieceatatime]

Re:

Yukon with solid spicers in a HP 60 and stock 14b

Sent from my SM-G930T using Tapatalk

 

[chef717]

4 stubs and 4 inners in my buggy and I wouldn't be surprised if I had 8 different brands in it at this point. I barely have a clue as to what is what anymore :****:

lmao !!!

 

[zjtrey]

branik 4340 in the 14b and superior foote inners up front, ten factory outers. I've had great luck with the ten factory stuff on my old rig also...

 

[nealcj8]

Yukon shafts with super joints in a HP 60. No problems yet!

 

[yjwrangler95]

I run 10 Factory 4340 shafts in a HP 60 with Bobby Long 300M joints

 

[sleepsontoilet]

Currie semifloat shafts in the rear Fab9, and Spicer shafts in the front Chevy 60. After 2 years of wheeling a Spicer ujoint popped taking out the yokes, and the splines started twisting on one rear shaft. Garrett Ankeny from Currie said they warranty twisted splines, so I'm covered. East Coast Gear Supply hooked me up with Yukon inner and outers with Superjoints for the front spider9 I'm building.

 

[motomx710]

Chevy 60 with Yukon axles and super joints. Holding for now

 

[Rjhoward32006]

Toyota axles ran original longfields for a couple years with no failures. I now run 300m rcv's in my new buggy with no failures. Yukon rear chromos's

 

[R H]

Rcv's in a 14 bolt. All good for now

 

[mac5005]

Ecgs chromo 35 spline stuff with USA made outers and ecgs drive flanges. I'm running spicer joints, going to upgrade to Yukon super joints. These spicer joints have been going strong since 2011.

 

[tonybolton]

Re: Re: What front axle shafts you running?

Ecgs chromo 35 spline stuff with USA made outers and ecgs drive flanges. I'm running spicer joints, going to upgrade to Yukon super joints. These spicer joints have been going strong since 2011.

2 years on my 30$ spicer greasable joints so far.

 

[allhaildeez]

60 front with 35 spline Yukons and CTM ujoints. Stock 14 bolt shafts in the rear.

 

[BUG-E J]

Re: Re: What front axle shafts you running?

2 years on my 30$ spicer greasable joints so far.

As long as I didn't land in the gas in the red rocket my spicers held strong.

 

[tonybolton]

As long as I didn't land in the gas in the red rocket my spicers held strong.

Yup, that's how my throttle foot reacts!

 

[poolman]

Chevy 60 with Yukon axles and super joints. Holding for now

X2

 

[dynajeep]

40 spline inner, 47 spline outer big bell RCV's here

 

[truckbroke]

Ford 60 with Yukon shafts and super joints..

 

[jeeptj99]

RCV in a HP Dana 44.... I can feel all of y'alls jealousy

 

[NTIDWELL]

Big RCV I land wide open no problems haha