PHILLBILLY1
Well-Known Member
It's so cute.....:redneck:
-
Help Support Hardline Crawlers :
Kia sportage sas w vortec
- Thread starter traildemon
- Start date
traildemon
Well-Known Member
No problem. when u do it if you need more info or anything lemme know :awesomework:
Well thanks phil. that means alot coming from you
I noticed my Tacoma kinda leaning towards it in the driveway so dont hit on it or you will make the big boy mad thats his bitch :;So I got caught up on all my projects and got back to work and got the trunk latch done it latches with the factory latch from the stock one and I put a pin in it just in case that fails for some reason. The passanger side is all buttoned up and painted, I knew it was sitting a little too long cause all the fresh shiny tubing was getting rusty but here is a few pics and its on to wiring tomorrow I got the Gm harness all thinned out and ready to drop in and everything is wired in the chassis besides the temp guage and all the dummy lights. I also need to flash the ecu so I dont have to mess with the vss and the passlock system but I think Clark might have the answer for that so we are rolling again. Oh and I got a full hyro steering setup for it just need some high steer arms and that will get thrown on there. woo hoo :bananadance:
Attachments
pos97TJ
Well-Known Member
Any ETA on the shakedown run? My little YJ I am building should be done in under a month. Get movin and lets go beat um
traildemon
Well-Known Member
freakin outa control jason!!
i should have my plates in since i just got the registration and tabs today so i need to bring the yota down and park under this thing
Hell yeah bring that litlle sucker down here, I wanna see it maybe some of that super fast build will rub off on this thing and it will get done :awesomework:
Any ETA on the shakedown run? My little YJ I am building should be done in under a month. Get movin and lets go beat um
two months ago
Im all caught up on projects so I have the time but now Im officially out of funds, I went about $1000 over budget on the steering. but I am really hoping to have it done before the end of September. I have to go get a chev ignition and passlock tomorrow so if it fires up after that I might be done earlier :awesomework: but Im probably going to have to send the ecu out because of the th350 but we will see. I still need to come down and bs I wanna see the new garage and I have a few little projects for ya. when you head out let me know I will load up the dodge and come play:awesomework:ChrisStewart
Well-Known Member
I see your shop has a double standard, last time I checked someone bitched at me for not picking up the bolt bin. :flipoff:
traildemon
Well-Known Member
:haha: Dammit Chris. I did that and dont worry I chewed myself out twice before they got cleaned up which leads me to believe that your a better listener than me :fawkdancesmiley:
pos97TJ
Well-Known Member
two months ago
I have two jeeps plugging up my shop from getting my **** in there but I figure by the end of the week I should have them both done and on to my junk. Should be goin soon though
traildemon
Well-Known Member
I have two jeeps plugging up my shop from getting my **** in there but I figure by the end of the week I should have them both done and on to my junk. Should be goin soon though
I know that baglicker shrek is working so if ya need a little help rollin them out quicker give me a call I just have a few little projects for this week I should be done by tuesday night with everything :awesomework: then I will just be messin with the rest of the wiring on this thing.
bustedbirf
Well-Known Member
- Joined
- Jul 15, 2010
- Messages
- 79
That's a big paper weight. :haha:
Why didn't you just build a driver cage for it and beat the hell out of it? Is that your favorite body style, and you dont want to hurt it?
Top notch work though:awesomework: Pictures of anything else you have turned out? :corn:
Why didn't you just build a driver cage for it and beat the hell out of it? Is that your favorite body style, and you dont want to hurt it?
Top notch work though:awesomework: Pictures of anything else you have turned out? :corn:
traildemon
Well-Known Member
It is a big ass paper weight right now :fawkdancesmiley: but maybe in the next few years it will be a wheeler :awesomework:
I built a full cage so that I could keep everyone safe not just myself and also keep all the glass in it and keep everything working the way it should. I didnt like the body when I got it but it kinda grows on a person.
Thanks, I have a few pics on here in my photo album in my profile pics, but I dont have vendor status so I cant post up other builds only my own.
Mark m.
Well-Known Member
Everything looks good but the exo:rb:
ChrisStewart
Well-Known Member
looks like you should have gotten off your ass and gave a helping hand, if you don't like it. Your a ****ing douche.
Mark m.
Well-Known Member
Got off my ass to help him I don't even know him. I bet you have a exo on your daily driver. **** You:hi::kissmyass:
traildemon
Well-Known Member
I dont go wheeling with queers so as long as you dont look at the build thread again you shouldnt have anything to worry about cocksucker :haha: :flipoff:
:awesomework:
Mark m.
Well-Known Member
Ok hillbilly. I think all anyone has do is look at that stupid ****ing exo and know your a *****. Oh I don't want to hurt the body.
**** with that much tube you should have just built a buggy.:looser:
traildemon
Well-Known Member
Well I built it for me and my 8 year old daughter, when you see me out wheelin walk up and introduce yourself and we will see who the ***** is
ChrisStewart
Well-Known Member
You got me, exo on the DD. Post something relevant to a guy's thread, not bash it. Not everyone has the same ideas when it comes to build ideas. My opinion still stands, your a douche. :flipoff:
ChrisStewart
Well-Known Member
Last thing I have to say that's not related to this thread. It's not mine or traildemon's fault you were born with a tiny cock, and feel the need to bash on other people who don't follow the "what's in". Mark, I will pm you when we do the shakedown run, bring your buggy down, lets go wheeling. :awesomework:
Mark m.
Well-Known Member
Ok your right I didn't start out to bash your rig. I think your work is very nice and way better than I could ever do but i just told you what I think of exos. I didn't start the name calling your DUMB ASS friend did.:looser: If you cant take a little criticism your in for a hard time because with that cage your going to get it.
Like I said one hell of built and nice fab work.:beer:
Like I said one hell of built and nice fab work.:beer:
