• Help Support Hardline Crawlers :

My first LS build

mna0121 said:
<iframe width="420" height="315" src="https://www.youtube.com/embed/zrvODpm9UZE" frameborder="0" allowfullscreen></iframe>

This is kinda funny, loller.gif
Click to expand...

I want to see the 49" burnout video!
 
I hear y'all and I will try to make it happen soon. When we got back from the dyno I worked on the heating issue, the first test drive reviled a problem with the transmission, it would not fully shift into hi gear. In fact it felt like it was trying to go into third and reverse at the same time. Reverse and third are on the same drum in a th 400 so kinda made since this could be happening. Transmission was freshened/ rebuilt back in October 2015 and only had dyno time and tuning time on it. I shipped it back to FTI in Deland FL, it had a broken sprag and a worn pump. FTI cost shared the fix with me, they replaced the direct drum with a 36 element one and a new 8 bolt HP pump. I have the tranny back in it and replaced the soft mounts with aluminum ones my PIL machined for me, waiting on him to machine the engine ones to get it all back together. I would like to get it back on the dyno and see how much the tranny going away hurt the numbers.
While I have it all apart I sent the headers JJ built for me to Q.C. Coatings up in MI. Bill Walker is a heck of a guy to deal with, he coated them, put then back in the mail and went on vacation. I haven't even paid him yet. I hope they are at the house when I get home tonight I will get pictures and more information about their product later.
RTR
 
Got these back from QC Coatings Shelby Township MI. Coating is their Ceramic Silver said to be good to around 1600 degrees. QC said they have seen as much as 200 degree surface temp drops with this coating. Shipped back to me was a little less than $300, they were great to deal with and fast turn around. Thanks again to JJ for welding these up, great job buddy and I still can't believe how loud they are without those yard sale mufflers attached to them.
RTR
 

Attachments

  • 102_4002.JPG
    102_4002.JPG
    50.2 KB · Views: 262
  • 100_4187_opt.jpg
    100_4187_opt.jpg
    50.6 KB · Views: 267
  • 100_4189_opt.jpg
    100_4189_opt.jpg
    35.6 KB · Views: 270
True surface, no gasket just Hi temp silicone

and replaced the poly mounts with aluminum that my PIL cut out for me

Transmission is back in, hope to shake it down this weekend. Maybe bring a little smoke off them 49's
RTR
 

Attachments

  • 100_4200_opt.jpg
    100_4200_opt.jpg
    41.9 KB · Views: 255
  • 100_4191_opt.jpg
    100_4191_opt.jpg
    32.9 KB · Views: 264
I'm calling all the local tv stations. I saw Sasquatch in that video. You'll see it on 60 minutes when they slow the vid down. I'm gone be rich. I'll snail mail you your royalties Shawn

Motor sounds good btw
 
I'm trying to cut down on my cussing. But this is worth one or two ...

BAD



****ING



ASS!!!!!!!
 
Cinnamon, that Sasquatch is Youtube famous, better not mess with the squatch.

Thanks JJ for your help getting it to this point. I would like to address the suspension next, maybe get it up a rock or hill or just a high curb?
Should have the drone footage to post when I get home tonight or maybe sometime over the weekend. Sure doesn't seem to be much interest in crawler burnouts around here though?

RTR
 
I don't think you know how tickled I'am to hear you call me cinnamon. Nobody around here uses my stage name.

It really brought me back to tasting fresh olives in my clear drank around the campfire :)
 

Latest posts

Random media

IMG_20130719_235947.jpg
Ign Start 12 Dual Row (1).jpeg.jpg
IMGA0385.jpg
DSC02497.JPG
IMGA0387.jpg
back-in-the-day-meme-generator-back-in-the-day-reputation-meant-something-8cb88b.jpg
IMAG0197.jpg
08-24-03-07.jpg
IMG_2651.JPG
Back
Top