• Help Support Hardline Crawlers :

Search results

  1. Skid Mark

    CJ5- Shortest transmission

    Thank you :beer: I fuken do that all the time:mad:
  2. Skid Mark

    CJ5- Shortest transmission

    Just sounding in on the t18 there was three size designs They all have to do with the center gear pin. The t18 that came stock behind a v-8 will have a 1.25 inch center shaft you can measure where it sticks out of the case. The other two designs were a smaller center shaft I belive 1" and 7/8"...
  3. Skid Mark

    Toyota pinion Nuts

    OK So you might know your ****. But Ive never had your problem and if I had a simular one I resolved it so Ya good luck on it hope you find what your looking for... :flipoff::beer:
  4. Skid Mark

    Toyota pinion Nuts

    I ruined a lot of toyotas first. And if its striping its not rocket sience. Either your turning it to hard and its not a real crush sleave or your threds are ****ed off either on the pinion or the nut.:beer:
  5. Skid Mark

    Toyota pinion Nuts

    Ok well try not turning it so ****ing hard ....
  6. Skid Mark

    Toyota pinion Nuts

    I have had simular problems mostly on the front axle. I won't use the crush sleves because they CRUSH And I've killed three in reversing on the front end. I have found on some solid ones they do need to be turned a little shorter in length. I've never seen it a problem to do that. I was talking...
  7. Skid Mark

    Thanks for the 5speed and transfercase Good parts,Good price,Good peoples

    Thanks for the 5speed and transfercase Good parts,Good price,Good peoples
  8. Skid Mark

    In nutral but still spins

    Yes thank you thank you.. First Id like to thank my frinds and family for supporting me.... All the people at the local parts store.... And the guy in WW2 that decided to call his General purpous vehicle a "Jeep" because with out him and the army most of us would be driveing toyota's...
  9. Skid Mark

    In nutral but still spins

    Viscosity in the transmission gear oil/fluid
  10. Skid Mark

    anyone else have this prob with leaf springs?

    When your giveing her to much wood.... Some times you swap cylenders and **** happens.. 4-Link time
  11. Skid Mark

    1994 Toyota Tire Sizing help

    :looser: :haha::haha::haha: Genius :haha::haha::haha: :eeek::scratchhead: x2 Oxymoron? :haha::haha: But since your too slow I willing to help the mentaly chalenged. 94 yota's came with 27mm tor.bars stock going to a 32mm tor.bars isent going to help FLEX and as stated befor...
  12. Skid Mark

    1994 Toyota Tire Sizing help

    I ran 33, 12.5 15 bfg mud terains and supper swampers on my 94 toy with no rubbing (mud flaps had all ready ben removed ) I had 32mm rancho torchen bars cranked up. The big kicker is to run the stock Option five spoke crome wheels of the 85 solid axle.
  13. Skid Mark

    np 205 in A cj7

    Go with the 205 it's a gear drive and strong as hell. I'm not to shure about the gear ratio's and how that might or might not benifit you. But in a cj7 jeep it should never fail Ive sean them behind 500+ horse and 44" on a full size catch air all day long
  14. Skid Mark

    Let's see your bumpers...

    One I built at a past job
  15. Skid Mark

    22re noise

    Replace the chain its only twenty dollors or so and get the sprokets while your at it Its probly the orig. Equ. Ive baught two yota's with back yard rebuilds on them one had ben 30 over and rebuilt twice and the tool sheds used the old chain.... It gets even more slack if your block or head...
  16. Skid Mark

    What's going on with the yota ? finished it yet? progress report pictures....... Well **** it's...

    What's going on with the yota ? finished it yet? progress report pictures....... Well **** it's summer your probly out twisting it up on the bike... Sick pic BTW
  17. Skid Mark

    need help with 22re swap

    If I remember corectly having the dash harnes is required because the location of the ECU is on the pasenger side kicK panel but thoes are easy score in the bone yard. It's also not a bad Idea to get a steering colume out of a 22re model when you pick up the dash harnes to simplify the ignition...
  18. Skid Mark

    need help with 22re swap

    Wireing on line The red wires are positive and the black are ground.....:haha::haha: I"ve only done one and it wasent recently, but I do know your going to need more then whats listed. The proper fuel pump setup is one of them. And if you never done a swap out like that I would be soliciting...
  19. Skid Mark

    funny pic

    The frame flex's more then the front suspension. :haha::haha:

Latest posts

Back
Top