accusump on a 20/22r hybrid question
So here is the question, I was given an accusump system by a friend of the family. It was kind of an afterthought and the motor is pretty much assembled. This means that drilling and tapping the block is out of the question. Motor is a 20/22r hybrid motor using the old tall block(pre83)
So i figured i have one of two options
1st- get one of the sandwich adapters from LC engineering for $40 and run the system into that
or
2nd- I noticed there was a large port on the exhaust side of the motor back by the firewall close to the head. Looked like it was about a 3/8" hole. Is this port an oil passage on the supply side of the system?
Any help would be much appreciated
So here is the question, I was given an accusump system by a friend of the family. It was kind of an afterthought and the motor is pretty much assembled. This means that drilling and tapping the block is out of the question. Motor is a 20/22r hybrid motor using the old tall block(pre83)
So i figured i have one of two options
1st- get one of the sandwich adapters from LC engineering for $40 and run the system into that
or
2nd- I noticed there was a large port on the exhaust side of the motor back by the firewall close to the head. Looked like it was about a 3/8" hole. Is this port an oil passage on the supply side of the system?
Any help would be much appreciated
Last edited: