Domestic Violence III

TDW · Mar 12, 2011

Hood pins installed.

TDW · Mar 12, 2011

Roof and side panels done. (big bolts on roof are for mock up)

Steering arms finished, knuckles painted.

TDW · Mar 12, 2011

Tabs to help keep the rams from slipping.

TDW · Mar 24, 2011

He is trying some .125, 4130 chromoly that was sent for heat treat. Kind of a test to see if heat treating that thin of material will hold up to the rigors of what the belly is put through.

TDW · Mar 24, 2011

He got some paint put on the hood, roof, and panels. Plumbing and wiring is next.

Money Mark · Mar 24, 2011

Baby-poo Latisha Brown:cheer:

stealthrunner1 · Mar 24, 2011

Fawker looks Killer J.....And thanks to you and sarg for the advice on the rad!!!!this thing is a work of TIG art!!!!:awesomework::beer:

Maverick26 · Mar 25, 2011

I figured you would go with the Champagne color... but you would have to get 22" rims and be blond and talk on the cell when driving it to complete the look.

Looks awesome J. :awesomework:

Binder · Mar 25, 2011

TDW said:
He is trying some .125, 4130 chromoly that was sent for heat treat. Kind of a test to see if heat treating that thin of material will hold up to the rigors of what the belly is put through.

Got a picture of the other side of the skid?......My guess is it will work well if there's plenty of bracing on top of it to keep it from flexing. If it flexes too much it may tend to crack.......
Good idea and worth a try!:cheer:

stealthrunner1 · Mar 25, 2011

Got a question for ya James....was looking at your motor and wondered what all your pulleys and accessorys came off of?????:eeek::eeek:

cisco · Mar 25, 2011

I like the big bolts on the roof. Looks tuff.

TDW · Mar 25, 2011

Binder said:
Got a picture of the other side of the skid?......My guess is it will work well if there's plenty of bracing on top of it to keep it from flexing. If it flexes too much it may tend to crack.......
Good idea and worth a try!:cheer:

Plate looks the same on the opposite side. Support for the plate will come from the belly tubes of the chassis. Right now I can't find a pic of that area.

TDW · Mar 27, 2011

stealthrunner said:
Got a question for ya James....was looking at your motor and wondered what all your pulleys and accessorys came off of?????:eeek::eeek:

Most were just the truck accessories located to where they need to be then build brackets to keep them there. I think he robbed a tensioner, or just an additional pully, form a Camaro.