-
Help Support Hardline Crawlers :
So i bought a 51 Whilly
- Thread starter Hip
- Start date
sheetmetal
im not very good especially without a break, im just using a vise, torch, a couple large pieces of metal with a couple of C clamps:redneck: i got this little carbide tipped saw blade that i made fit a 4 1/2 grinder and i cuts aluminium like butter but it sure makes a mess. all the little sparkles are bits of razor sharp alum.
im not very good especially without a break, im just using a vise, torch, a couple large pieces of metal with a couple of C clamps:redneck: i got this little carbide tipped saw blade that i made fit a 4 1/2 grinder and i cuts aluminium like butter but it sure makes a mess. all the little sparkles are bits of razor sharp alum.
Attachments
Last edited:
im sick of the sound of my aluminium saw cutting metal, makes my teeth grind. :redneck:
almost done with that phase. i thought i was all done but when i put it all together last night i realized i needed two more tabs welded for tapping.:looser:
one more long day and the interior sheetmetal will be done. then another week on the cowl area.....:eeek:
almost done with that phase. i thought i was all done but when i put it all together last night i realized i needed two more tabs welded for tapping.:looser:
one more long day and the interior sheetmetal will be done. then another week on the cowl area.....:eeek:
dove'd85
Well-Known Member
lookin good hip, nice diff cover by the way
got one for the back to?
got one for the back to?lookin good hip, nice diff cover by the way
in fact your diff left the shop with my cover on it if i remember correctly, just to keep the dirt out:hi:
Attachments
dove'd85
Well-Known Member
dove'd85
Well-Known Member
bump stop for mock-up?
anyone have any bump stops i could use for mock up?
one of the last things i need to set up and dont have the parts or cash to buy right now. if i could borrow one that would be great then i can finnish off fabrication and dissassemble for finish weld and chassis paint.
anyone have any bump stops i could use for mock up?
one of the last things i need to set up and dont have the parts or cash to buy right now. if i could borrow one that would be great then i can finnish off fabrication and dissassemble for finish weld and chassis paint.
tomsbrokeagain
Well-Known Member
Bump stops
What kinda flavor you lookin for?
Poly?
Height?
What kinda flavor you lookin for?
Poly?
Height?
dinkin with the new windshield frame. i have some pictures in the camera....:fawkdancesmiley:my rear suckdown winch should be here today so that is the last major piece of equipment that needs mounted.
redid the fuel cell mounts , added the sway bar.
need to adjust the steering ram mount some as it touches the drag link at full turn.
theAuthority
Well-Known Member
Beautiful build, i'm just down here in Lynnwood if you need some help lifting or cleaning.
I can do mechanical work but not welding/fab .... atleast not yet
I might need some help welding on my truck, so we could exchange services ..
Beautiful build again - how does the horseless carriage thing work? Is that going to be street legal?
I can do mechanical work but not welding/fab .... atleast not yet
I might need some help welding on my truck, so we could exchange services ..
Beautiful build again - how does the horseless carriage thing work? Is that going to be street legal?
dove'd85
Well-Known Member
Beautiful build, i'm just down here in Lynnwood if you need some help lifting or cleaning.
I can do mechanical work but not welding/fab .... atleast not yet
I might need some help welding on my truck, so we could exchange services ..
Beautiful build again - how does the horseless carriage thing work? Is that going to be street legal?
it will be were he is going
hip are you done welding aluminum yet? i think i am gettin another yota and i need to burn some **** onto it:awesomework:
